04.23.25 -- Metzger Online Only Auction! -- Vehicles - Construction Equipment & Supplies – RV & Auto Parts, Fixtures – Pallet Racking – Horse Vet Care Manuals - Weber, Blackstone, Big Green Egg, & Traeger Grill Accessories - CB Radios – Post Office Boxes - Vintage Light Fixtures & Crock Lamps – Paintings inc. Hargrove & More! -- Milford, IN

2019 Isuzu NPR box truck featuring a Morgan body and diesel engine. The odometer reads 96,652 miles. The cab is equipped with a gray fabric interior, manual climate controls, and a stereo system. The rear box includes interior paneling, a roll-up rear door, and an exterior platform step. GVWR is rated at 16,000 lbs, as detailed on the manufacturer label. Hitch and wheel configuration suitable for commercial use. Sold as is.

2004 chevy 2500HD 8.1 engine allison transmission has gooseneck hitch, recently installed a new heavy duty bumper hitch as well, 4x4 on the floor, runs and drives great only issue is the rust but the frame is still good, hot heat cold ac, but the fan only works on the highest setting.

As the name implies, the Century is completely automatic. It’s operated by remote control or a wired wall switch and powered by 110 volts through the vehicle’s inverter or shell power. This provides the ultimate convenience to any RV owner. In its fully opened position, there are no arms to obstruct your enjoyment of the patio area underneath. For safety, a wind or shake sensor is provided with every awning that will automatically close your awning if a gentle breeze turns into a dust devil. With all components tucked safely into the attractive casing, your awning is safe from the elements even at high-speed highway driving. New price from factory is in the ballpark of 10k. This awning is still in factory shipping crate. Never out of the box.

Pioneer Athletics Field Striping machine equipped with a Honda GX 120  gas-powered engine. This is a self propelled machine, front wheel hydraulic drive. Includes a Trimaco Supertuff paint strainer box.

Cummins Onan Commercial QD generator powered by a Kubota diesel engine. Emission label indicates compliance with U.S. EPA and California standards. Pallet jack not included. Sold as is.  Automatic glow plug pre-heat module does not operate as it should. This was solved by engineering it to pre-heat while engine cranks to start.  Hour meter non working.  Just serviced, complete tune up, and fluid change.  $1700 in receipts. Not perfect, but in good running condition!   Powers like it should.

Hydraulic floor jack with a capacity of 10 tons, measuring 55 inches in length. Features a steel construction, four wheels for mobility, and a long handle for operation. Manufacturer label is partially visible with detailed specifications.

12V professional truck crane with a 1,000 lb load capacity. Features a robust metal frame with caster wheels for mobility. Includes a WFCO 55 Amp power converter and a remote control with lift/lower operation. Dimensions are 52"x60"x68".

Gardner Denver Electra-Saver II rotary screw air compressor featuring a Toshiba 3-phase induction motor. Rated for 460 volts, this unit includes an Auto-Sentry ES-II controller. Dimensions: 79”x48”x50”.  50hp 3phase. Last serviced in 22

25 Freightliner M2 cab mats, fit late model cabs with sears seating. Made for automatic trans. But could possibly be modified for manual.

Saniflo Sanimarin SN4 RV Luxe toile. Features include 12V operation, a 26A draw, and a 300W capacity, designed for marine or RV use. Includes original packaging, documentation, and additional components. Sold as-is.

Evinrude branded 6-gallon metal gasoline tank featuring “Cruise-a-Day” graphics and a red painted surface. Includes cap and attached fittings. Measures approximately 17 inches in length, 10 inches in width, and 10 inches in height.

37.25”x67” cargo trailer door constructed with an exterior metal panel and an interior OSB panel. Features include pre-installed hinges, latch, and locking mechanisms. Additional metal hardware, such as a locking bar, is included.  Comes off of a 2013 LOOK cargo trailer.

Set of two aluminum loading ramps, each measuring 88 inches in length. Designed with serrated rungs for enhanced traction and grip.

Suncan brand pressure lock portable gate, featuring an accordion-style folding design. Measures 79 inches by 26 inches when closed. Constructed with metal, equipped with six caster wheels for mobility, and showing areas of surface rust typical of heavy-duty use.

Metal banding cart featuring a spool holder for banding material and a built-in storage tray. Designed with a handle and wheels for mobility Includes a banding spool mounted on the holder.

Three-shelf utility cart made of molded white plastic with a rectangular frame. Features a handle on one end and is missing one wheel, affecting mobility. Dimensions are approximately 17 inches x 32 inches x 34 inches.

Pallet containing 2 end standards measuring 12 feet in length and 8 cross arms measuring 10.5 feet in length. Components are metal and feature holes for assembly purposes.

Metal shelving components including 8 end standards, each measuring 12 feet, and 4 cross arms, each measuring 9 feet in length. Constructed of durable metal with perforated details for adjustment.

Group of steel cross arms measuring 9 feet in length each. Designed for industrial applications such as warehouse shelving or structural support. Features pre-drilled holes for assembly and an off-white finish.

A set of steel pallet racking cross arms, each measuring 9 feet in length. The cross arms are painted in orange and white with attached end brackets for assembly.

Set of approximately 14 wire pallet decking panels, each measuring 36 inches in width. The panels are made of durable metal wire, designed for use in pallet racking systems to support loads and improve stability.

Group of 36-inch wire pallet decking panels. Constructed from metal wire with evenly spaced grid patterns for strength and support, these panels are suitable for industrial or warehouse use.

Insulated dog housing unit from G.D.M. Dog Dens USA. Constructed with a black ribbed plastic exterior and a metal door with a locking latch. Includes internal PVC fittings and heat mat, as shown.

Cryofab oxygen storage tank constructed from stainless steel, marked with UN 1073 for refrigerated liquid oxygen. Features include two pressure gauges (PSI and oxygen flow rate) and multiple attached hoses.  Approximately 110 gallon.

Metal pet self feeder featuring a durable construction with an upper storage bin and an open lower compartment for food access. The design allows for gravity-fed dispensing. 11x11x24